Description INA / FAG Spherical plain bearing - GE120UK2RSBINA | GE120-UK-2RS-B in Bearings and bearing housings / Spherical Plain Bearings and Rod Ends / Spherical Plain Bearings Application area Rod ends Hinge points Suspensions Characteristics Double-sided trailing rubber seal Maintenance...
INA / FAG Spherical plain bearing - GE120UK2RSBINA | GE120-UK-2RS-B in Bearings and bearing housings / Spherical Plain Bearings and Rod Ends / Spherical Plain Bearings
Double-sided trailing rubber seal
Gliding ring hard chrome / PTFE
OEM reference number
I. Rod end bearing is dominated by a spherical outside within the inner ring and a spherical outer ring, can bear larger load.According to the different types and structure, can bear radial load, axial load or the joint of the radial, axial load.Because the inside is outside the sphere with composite material, so the bearing can produce self-lubrication at work.Commonly used for low speed swinging motion, also can be tilted movement within a certain Angle, when the supporting shaft and shaft shell hole concentricity is bigger, can still work normally.used in water conservancy, professional machinery and other industries.
Of course not, but they have to work.with perfection. There is practically no
time for maintenance work.a main route of transit,such as the bridge in the port of Barcelona,need to open and close several times a day. This means very heavy work for all points of support of the mobile segment of the bridge, since each piece of this building is 70 meters length and weighs 2000 tons. Barcelona. Today, the largest tilting bridge of the world tilts on large ball-and-socket dimensions, free of maintenance, with 670 mm of the hole diameter. It does not matter if it's a rocking bridge double, as in this case, or hydraulic structures, balance sheet or rotating bridges - the situation always requires slip bearings high-performance Elgoglide® for being totally free maintenance. The high-slip bearings Elgoglide® performance low friction, do not need lubrication, bear very and are especially appropriate for oscillating movements. With the smallest dimensions, ISO 12240, they offer, in comparison, the highest rates of performance. Reason: the capabilities loading dynam- high in relation to reduced weight of the bearing. It is not at random that we attribute the qualification "high performance". In the tests, the bearings were subjected to dynamic load up to 600 N / mm2. This corresponds to to 200% of the load capacity dynamics indicated in the catalog, demonstrates the existence of high performance reserves. Of this In this way, we guarantee necessary for its application. construction.
This GE120DO bearing is a metric steel/steel open type spherical plain bearing with a standard radial internal clearance. The bearing's dimensions are 120x180x85.
Radial plain bearings have an inner ring with an outer spherical convex surface and an outer ring with a corresponding inner spherical but concave surface. Due to their design, these bearings are particularly suitable for bearings in which the movements between the shaft and the body need to be balanced, or in which oscillating or repeated tilting or swinging movements at relatively low sliding speeds must be allowed. Push-in spindle heads are supplied as standard with a combination of steel / steel and steel / bronze sliding surfaces. Both types of articulated heads require regular lubrication. Joints with a combination of steel / steel sliding surfaces have hardened, phosphated and lubricated sliding surfaces. The heads are very wear-resistant and are therefore exceptionally suitable for bearings that have to carry heavy AC loads. Joints with a combination of steel / bronze sliding surfaces have a hardened and chrome inner ring and a bronze outer ring. For this reason optimal performance under the conditions of insufficient lubrication is ensured. Non-spindle plain bearings are provided with special sliding layers made of modern materials with very low friction. Bearings can work without lubrication. They are designed for bearings that require long durability bearings without lubrication requirements or for operating conditions that do not allow the use of a steel-to-steel sliding bearing bearing (eg insufficient or no lubrication). Push-free, plain bearing bearings are primarily designed for heavy-duty bearings with a constant direction of action.