SKF 6022 bearing Product Description Single row deep groove ball bearing 110mm inside x 170mm outside x 28mm width SKF Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation,...
SKF 6022 bearing
Single row deep groove ball bearing 110mm inside x 170mm outside x 28mm width
SKF Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.
Open Deep Groove Ball Bearings: One of the most commonly used bearings, the open types are manufactured without seals to allow for the free circulation of either oil or grease, used in gearboxes and other environments where no foreign matter would be present and a lubricant supply is available.
Benefits: Used widely in transmissions etc, can be used in oil or greased, cost effective solution
6022-2Z/C3 SKF Shielded Deep Groove Ball Bearing 110x170x28mm
Deep Groove Metric Ball Bearings are very versatile. Very simple in design being non-separable these bearings are suitable for high and even very high speeds, robust in operation and require little maintenance. Having deep raceway grooves in close proximity to the balls enables a deep groove ball bearing to accommodate axial loads in both directions as well as radial loads, even at high speeds.
Single row deep groove ball bearings are the most common and widely used bearing.
Choose from open, sealed (2RS) or shielded (2Z) designations.
d 110 mm
D 170 mm
B 28 mm
d1 ≈ 129.05 mm
D2 ≈ 155.3 mm
r1,2 min. 2 mm
da min. 119 mm
da max. 128.9 mm
Da max. 161 mm
ra max. 2 mm
Basic dynamic load rating C 85.2 kN
Basic static load rating C0 73.5 kN
Fatigue load limit Pu 2.6 kN
Limiting speed 2400 r/min
Calculation factor kr 0.025
Calculation factor f0 15.6
Mass bearing 2.02 kg