SKF Single row deep groove ball bearing with two metal shields & C3 clearance 10mm inside x 30mm outside x 9mm width, also known as 6200ZZC3, 6200ZC3, 62002ZC3 6200ZRC3 62002ZRC3 6200ZZEC3 SKF Single row deep groove ball bearings are used in a wide variety of applications, they are simple in...
SKF Single row deep groove ball bearing with two metal shields & C3 clearance 10mm inside x 30mm outside x 9mm width, also known as 6200ZZC3, 6200ZC3, 62002ZC3 6200ZRC3 62002ZRC3 6200ZZEC3
SKF Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.
Inside diameter: 10mm
Outside diameter: 30mm
Basic Load Ratings
Reference speed: 56000 r/min
Limiting speed: 28000 r/min
r1,2 min: 0.6
This 6200 2Z C3 SKF bearing is a Shielded Deep Groove Radial Ball Bearing with a larger than standard radial internal clearance The bearing's dimensions are 10x30x9.
Deep Groove Metric Ball Bearings - Shielded
Shielded (2Z) bearings are fitted with two metal dust shields to prevent the ingress of dirt and foreign matter. 2RZ bearings are 2Z bearings fitted with two low friction seals.
Deep groove ball bearings are versatile and robust in operation, they also require little maintenance. Deep groove ball bearings are the most widely used bearing type due to their simple design and suitability for high speeds.
Features and Benefits
• Primarily intended for applications where the bearing inner ring rotates
• If the outer ring rotates there is a danger that grease may be lost from the bearing at high speeds
• Both standard and C3 clearance available
SKF E2 Energy Efficient Bearings
SKF E2 Energy Efficient Bearings are deep-groove, shielded, ultra-low friction bearings that feature an optimised design, balanced between internal geometry, grease and cage type.
With 30 to 50% lower friction when compared with standard SKF bearings, the energy savings achievable when using SKF Energy Efficient Bearings are substantial, and the bearing life is extended significantly - in most cases more than double.
SKF E2 Energy Efficient Bearings offer ultra-low friction and typically generate less heat and can operate at higher speeds than ISO or SKF Explorer Bearings.
Dimensionally fully-compatible with standard bearings
Typical applications for SKF Energy Efficient Bearings include:
Electric motors up to 37kW (50HP)
Light to medium-loaded machines with shaft diameters up to 60mm
Excellent drop-in replacement for in-service electric motors