Product Description This 6202 2Z C3 SKF bearing is a Shielded Deep Groove Radial Ball Bearing with a larger than standard radial internal clearance The bearing's dimensions are 15x35x11. SKF Single row deep groove ball bearing with two metal shields & C3 clearance 15mm inside x 35mm...
This 6202 2Z C3 SKF bearing is a Shielded Deep Groove Radial Ball Bearing with a larger than standard radial internal clearance The bearing's dimensions are 15x35x11.
SKF Single row deep groove ball bearing with two metal shields & C3 clearance 15mm inside x 35mm outside x 11mm width, also known as 6202ZZC3, 6202ZC3, 62022ZC3 6202ZRC3 62022ZRC3 6202ZZEC3
SKF Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.
Inside diameter: 15mm
Outside diameter: 35mm
Basic Load Ratings
Reference speed: 43000 r/min
Limiting speed: 22000 r/min
r1,2 min: 0.6
Deep Groove Metric Ball Bearings - Shielded
Shielded (2Z) bearings are fitted with two metal dust shields to prevent the ingress of dirt and foreign matter. 2RZ bearings are 2Z bearings fitted with two low friction seals.
Deep groove ball bearings are versatile and robust in operation, they also require little maintenance. Deep groove ball bearings are the most widely used bearing type due to their simple design and suitability for high speeds.
Features and Benefits
• Primarily intended for applications where the bearing inner ring rotates
• If the outer ring rotates there is a danger that grease may be lost from the bearing at high speeds
• Both standard and C3 clearance available
E2.6202-2Z/C3 SKF E2 Energy Efficient Deep Grooved Ball Bearing 15x35x11 Metal Shields
To meet the ever-increasing demand to reduce energy consumption and friction, SKF have developed the E2 Energy Efficient class of deep groove ball bearing that has a frictional moment at least 30% lower than a standard SKF Explorer bearing.
SKF E2 bearings have been shown to last longer and use less lubricant than a standard SKF Explorer bearing.
Typical applications include electric motors,pumps, conveyors and fans, and are available in the 60,62 and 63 dimension series. They are supplied with a shield on both sides and have C3 radial internal clearance as standard.