SKF 6203 2ZC3

Deep Groove Metric Ball Bearings - Shielded Shielded (2Z) bearings are fitted with two metal dust shields to prevent the ingress of dirt and foreign matter. 2RZ bearings are 2Z bearings fitted with two low friction seals. Deep groove ball bearings are versatile and robust in operation, they also...

Description

Deep Groove Metric Ball Bearings - Shielded

Shielded (2Z) bearings are fitted with two metal dust shields to prevent the ingress of dirt and foreign matter. 2RZ bearings are 2Z bearings fitted with two low friction seals.
Deep groove ball bearings are versatile and robust in operation, they also require little maintenance. Deep groove ball bearings are the most widely used bearing type due to their simple design and suitability for high speeds.

Features and Benefits

• Primarily intended for applications where the bearing inner ring rotates
• If the outer ring rotates there is a danger that grease may be lost from the bearing at high speeds
• Both standard and C3 clearance available

 

Product Description

This 6203 2Z C3 SKF bearing is a Shielded Deep Groove Radial Ball Bearing with a larger than standard radial internal clearance The bearing's dimensions are 17x40x12.

 

SKF Single row deep groove ball bearing with two metal shields & C3 clearance 17mm inside x 40mm outside x 14mm width, also known as 6203ZZC3, 6203ZC3, 62032ZC3 6203ZRC3 62032ZRC3 6203ZZEC3

SKF Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads. 

Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.

Principal Dimensions
Inside diameter: 17mm
Outside diameter: 40mm
Width: 12mm

Basic Load Ratings
Dynamic: 9.95kn
Static: 4.75kn

Speed Ratings 
Reference speed: 38000 r/min
Limiting speed: 19000 r/min

Dimensions mm
d1: 24.5
d2: -
D2: 35
r1,2 min: 0.6

 

Deep Groove Metric Ball Bearings - Shielded

Shielded (2Z) bearings are fitted with two metal dust shields to prevent the ingress of dirt and foreign matter. 2RZ bearings are 2Z bearings fitted with two low friction seals.
Deep groove ball bearings are versatile and robust in operation, they also require little maintenance. Deep groove ball bearings are the most widely used bearing type due to their simple design and suitability for high speeds.

 

The SKF thin section bearing range have very thin rings and very small cross section. They are further characterized by low weight, low friction and high stiffness.
These characteristics make them particularly suitable for compact, lightweight bearing arrangements which are stiff and which have relatively large bore diameters.

 

 

 

 

 

Hot Tags: skf 6203 2zc3, suppliers, wholesale, price

Feedback

Related Products

Products List