Product Description This 6204 2Z C3 SKF bearing is a Shielded Deep Groove Radial Ball Bearing with a larger than standard radial internal clearance The bearing's dimensions are 20x47x14. Deep Groove Metric Ball Bearings - Shielded Shielded (2Z) bearings are fitted with two metal dust shields...
This 6204 2Z C3 SKF bearing is a Shielded Deep Groove Radial Ball Bearing with a larger than standard radial internal clearance The bearing's dimensions are 20x47x14.
Deep Groove Metric Ball Bearings - Shielded
Shielded (2Z) bearings are fitted with two metal dust shields to prevent the ingress of dirt and foreign matter. 2RZ bearings are 2Z bearings fitted with two low friction seals.
Deep groove ball bearings are versatile and robust in operation, they also require little maintenance. Deep groove ball bearings are the most widely used bearing type due to their simple design and suitability for high speeds.
Features and Benefits
• Primarily intended for applications where the bearing inner ring rotates
• If the outer ring rotates there is a danger that grease may be lost from the bearing at high speeds
• Both standard and C3 clearance available
SKF Single row deep groove ball bearing with two metal shields & C3 clearance 20mm inside x 47mm outside x 14mm width, also known as 6204ZZC3, 6204ZC3, 62042ZC3 6204ZRC3 62042ZRC3 6204ZZEC3
SKF Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.
Inside diameter: 20mm
Outside diameter: 47mm
Basic Load Ratings
Reference speed: 32000 r/min
Limiting speed: 17000 r/min
r1,2 min: 1
6204-2Z/C3 SKF Shielded Deep Groove Ball Bearing 20x47x14mm
Deep Groove Metric Ball Bearings are very versatile. Very simple in design being non-separable these bearings are suitable for high and even very high speeds, robust in operation and require little maintenance. Having deep raceway grooves in close proximity to the balls enables a deep groove ball bearing to accommodate axial loads in both directions as well as radial loads, even at high speeds.
Single row deep groove ball bearings are the most common and widely used bearing.
Choose from open, sealed (2RS) or shielded (2Z) designations.
C3 - Bearing internal clearance greater than normal.