Product Description This 6315 2RS1 C3 SKF bearing is a Sealed Deep Groove Radial Ball Bearing with a larger than standard radial internal clearance The bearing's dimensions are 75x160x37. 6315-2RS1/C3 SKF Sealed Deep Groove Ball Bearing 75x160x37mm Deep Groove Metric Ball Bearings are very...
This 6315 2RS1 C3 SKF bearing is a Sealed Deep Groove Radial Ball Bearing with a larger than standard radial internal clearance The bearing's dimensions are 75x160x37.
6315-2RS1/C3 SKF Sealed Deep Groove Ball Bearing 75x160x37mm
Deep Groove Metric Ball Bearings are very versatile. Very simple in design being non-separable these bearings are suitable for high and even very high speeds, robust in operation and require little maintenance. Having deep raceway grooves in close proximity to the balls enables a deep groove ball bearing to accommodate axial loads in both directions as well as radial loads, even at high speeds.
Single row deep groove ball bearings are the most common and widely used bearing.
Choose from open, sealed (2RS) or shielded (2Z) designations.
C3 - Bearing internal clearance greater than normal.
Size 75mm x 160mm x 37mm
6315 2RS1 C3, SKF, Deep Groove Ball Bearing, Sealed
Seals/Shields: Rubber seals, both sides
Dimensions: 75x160x37 (mm)
Inside Diameter: 75mm
Outside Diameter: 160mm
Alternative Product Codes: 6315 DDU C3, 6315 2NSE c3, 6315 2RSH C3, 6315 LLU C3, 6315 EE C3, 6315 2RS C3, 6315 2RSR C3, 63152RSC3, 6315/2RS/C3, 6315-2RS-C3
Deep groove ball bearings are used in a particularly wide variety of applications
Consequently, they are available in many executions and sizes
Open bearing: Prefix designation Null
Sealed on both sides: Prefix designation 2RS
Shielded on both sides: Prefix designation 2Z
Snap ring groove: Prefix designation NR
Deep Groove Metric Ball Bearings - Open
SKF deep groove ball bearings are the most common type of rolling bearings. Available in a variety of metric sizes and found in a wide range of applications in many industries.
Features and Benefits
Accepts radial and axial loads High speed operation
Primarily intended for applications where the bearing inner ring rotates
If the outer ring rotates there is a danger that grease may be lost from the bearing at high speeds
Item: Radial Ball Bearing, Bearing Type: Sealed, Bore Dia.: 75 mm, Bore Tolerance: +0/-.007 mm, Outside Dia.: 160 mm, Outside Dia. Tolerance: +0/-11 micron, Width: 37 mm, ABEC Tolerance: 1, Dynamic Load Capacity: 26,800 lb., Static Load Capacity: 17,200 lb., Max. RPM: 5,600, Temp. Range: -40 Degrees to 212 Degrees F., Bearing Material: 52100 Chrome Steel, Cage Material: Pressed Steel, Seal Material: Synthetic Rubber,Lubrication: EM Grease, Industry Number: 6315-2RS C3
SKF Energy Efficient deep groove ball bearings are filled with a special, low-noise, low-friction SKF grease that offers extended grease life. Additionally, the polymer cage is designed to facilitate grease migration inside the bearing, resulting in a better lubrication of the surface contacts between balls, raceways and cage pockets.
SKF Energy Efficient deep groove ball bearings are fitted with a ball centred snap-type cage made of a temperature-resistant glass fibre reinforced composite polymer.
The designations for SKF Energy Efficient deep groove ball bearings follow the basic SKF designation system. SKF Energy Efficient bearings are supplied in a box marked SKF Energy Efficient bearings.